This fun Octagon shaped Stardrop Table Topper was designed with EQ8 Quilt Design Software by The Electric Quilt Company . This tutorial takes that design and gives you the information to make it yourself. This is a very easy beginner foundation pieced mini quilt but it is helpful to have some basic knowledge of paper piecing. you will assemble eight units to combine to create the top of this little quilt. I made this with gradations of aqua and teal solid cotton fabrics and the background is a lovely linen. This is the perfect base for your table centerpiece.

Stardrop Table Topper

Finished size is approximately 24″ x 24″

Materials

1/8 yd of light aqua cotton
1/8 yd of medium aqua cotton
1/8 yd of teal cotton
1 yd for background, backing and binding
28″ square piece of batting
Stardrop Template 1 Updated 2022
Stardrop Template 2
16 sheets of Foundation Paper or Quilters Newsprint

Directions

Cut Fabric:

From light aqua, cut:

8 — 4 1/2 ” x 5″ rectangles

From medium aqua, cut:

8 — 5″ x 7″ rectangles

From dark teal, cut:

8 — 5″ x 10″ rectangles

From the dark linen, cut:

1 – 28″ square for the backing
16 — 2 1/2″ x 6″ rectangles for top template background
16 — 3″ x 7″ rectangles for bottom template background
8 — 2″ x 11″ strips for bottom template background
95″ x 2 1/4″ strips for binding (can be pieced together)

Paperpiecing

Use a pencil to trace the foundation pattern once onto a lightweight copy or foundation piecing paper of your choice. I used EQ Printables Foundation sheets for this project generously provided by EQ.

Use a very short machine stitch, I use 1.8 mm so the paper will tear off easily later.

To foundation paper piece, stitch fabric pieces to a foundation paper with the marked side of the paper facing up and the fabric pieces layered underneath. The resulting pieced unit is a mirror image of the foundation paper.

Using the larger template and starting in the number order, place the first two fabric pieces, RST, on the back side of the foundation paper with the edges of the fabrics extending ¼” beyond the first stitching line. The first stitching line is between section A1 and A2.

Holding the pieces in place, stitch from the top side on the line between the two areas, starting and stopping just past the seam allowances.
Above, you see the back side of the pieces we just stitched.
Flip the piece back over and fold the paper back on the line you just sewed.
Using a ruler, trim the seam to 1/4″. Be careful not to cut through your paper template.
Fold the paper back and flip it over again.
Open out the piece and press the seam. The right sides of the fabrics will show on the back side of the paper template.
Continue to add pieces in order step by step until you have finished the bottom template.
Trim the bottom template around the outside seam allowance on the paper.
Use the same method to sew the top template pieces.
Carefully sew the top and bottom foundation templates together. You should have a total of 8 triangle shapes.
Sew together the paper pieced shapes, two at a time, aligning seams and points.
Then stitch together the pieces to form two halves. Now you can sew together the two halves, aligning the center points and seams.
Carefully tear off the foundation pattern when you have finished the block

Assemble the Stardrop Table Topper

Make a quilt sandwich with the quilt top, batting and backing.
Baste the quilt layers together.
Quilt as desired. I used some free motion feathers and leafy motifs in the triangles.
Sew the 2 1/4″ strips together for the binding and add to the quilt. You are finished!