Free Tutorial: Stardrop Table Topper

This fun Octagon shaped Stardrop Table Topper was designed with EQ8 Quilt Design Software by The Electric Quilt Company .  This tutorial takes that design and gives you the information to make it yourself.  This is a very easy beginner foundation pieced mini quilt but it is helpful to have some basic knowledge of paper piecing.  you will assemble eight units to combine to create the top of this little quilt.  I made this with gradations of aqua and teal solid cotton fabrics and the background is a lovely linen.  This is the perfect base for your table centerpiece.

Stardrop Table Topper

Finished size is approximately 24″ x 24″

Materials

  • 1/8 yd of light aqua cotton
  • 1/8 yd of medium aqua cotton
  • 1/8 yd of teal cotton
  • 1 yd for background, backing and binding
  • 28″ square piece of batting
  • Stardrop Template 1
  • Stardrop Template 2
  • 16 sheets of EQ printable Foundation Sheets or other foundation paper

HINT:  Have you tried printing on EQ Printables Foundation Sheets?  EQ has 25 sheet packages of special nonwoven material that you can run through your printer just like paper.  It tears away easily, is translucent and won’t dull machine needles. If you don’t want to print, you can also use a pen, pencil or marker to draw your template onto the paper.  Electric Quilt generously provided the foundation sheets for this project.

Directions

Cut Fabric:

From light aqua, cut:

  • 8 — 4 1/2 ” x 5″ rectangles

From medium aqua, cut:

  • 8 — 5″ x 7″ rectangles

From dark teal, cut:

  • 8 — 5″ x 10″ rectangles

From the dark linen, cut:

  • 1 – 28″ square for the backing
  • 16 — 2 1/2″ x 6″ rectangles for top template background
  • 16 — 3″ x 7″ rectangles for bottom template background
  • 8 — 2″ x 11″ strips for bottom template background
  • 95″ x 2 1/4″ strips for binding (can be pieced together)

 

Paperpiecing

 

  1. Use a pencil to trace the foundation pattern once onto EQ Printables Foundation sheets or other lightweight copy or foundation piecing paper of your choice. You can also print a copy of the foundation pattern onto lightweight copy or foundation piecing paper.  EQ generously provided the foundation sheets for this project.  The sheets feel like a soft stabilizer, they easily went through my inkjet printer.  I like that you can see through them so it is easy to match up fabrics from the backside.  It is super easy to sew through and it is not as stiff as paper.
  1. Use a very short machine stitch, I use 1.8 mm so the paper will tear off easily later.
  1. To foundation paper piece, stitch fabric pieces to a foundation paper with the marked side of the paper facing up and the fabric pieces layered underneath. The resulting pieced unit is a mirror image of the foundation paper.

  1. Using the larger template and starting in the number order, place the first two fabric pieces, RST, on the back side of the foundation paper with the edges of the fabrics extending ¼” beyond the first stitching line. The first stitching line is between section A1 and A2.
  1. Holding the pieces in place, stitch from the top side on the line between the two areas, starting and stopping just past the seam allowances.
  2. Above,  you see the back side of the pieces we just stitched.
  3. Flip the piece back over and fold the paper back on the line you just sewed.
  4. Using a ruler, trim the seam to 1/4″. Be careful not to cut through your paper template.
  5. Fold the paper back and flip it over again.
  6. Open out the piece and press the seam. The right sides of the fabrics will show on the back side of the paper template.
  7. Continue to add pieces in order step by step until you have finished the bottom template.
  8. Trim the bottom template around the outside seam allowance on the paper.
  9. Use the same method to sew the top template pieces.
  10. Carefully sew the top and bottom foundation templates together.  You should have a total of 8 triangle shapes.
  11. Sew together the paper pieced shapes, two at a time, aligning seams and points.
  12. Then stitch together the pieces to form two halves.  Now you can sew together the two halves, aligning the center points and seams.
  13. Carefully tear off the foundation pattern when you have finished the block

Assemble the Stardrop Table Topper

  1. Make a quilt sandwich with the quilt top, batting and backing.
  2. Baste the quilt layers together.
  3. Quilt as desired.  I used some free motion feathers and leafy motifs in the triangles.
  4. Sew the 2 1/4″ strips together for the binding and add to the quilt.  You are finished!

I would love to see your Stardrop Table Topper Quilt, tag me on instagram @lorimillerdesigns.

Looking for the EQ8 Design Instructions?  This quilt was designed in two parts, follow the links below:

EQ8 Stardropper Table Topper Design – Part 1

EQ8 Stardropper Table Topper Design – Part 2

For more projects and tips and techniques on using EQ8, visit my Electric Quilt blog series EQ8 Lessons with Lori.

For more information on EQ8, go to Electric Quilt 8 Software.

Tutorial – Holiday Table Runner

Here is another free tutorial for a project designed with EQ Mini Software by The Electric Quilt Company.  This Holiday Table Runner uses one of the built in blocks colored with traditional Christmas colors to create a lovely item for your home decor.

eqmini-nohole-sm-226x300

EQ Mini is the new scaled down, simpler version of EQ7 quilt design software.  This program was created for quilters who are just getting started using software for quilt design.  EQ Mini will help you create, edit, share, and print patterns and yardage for your quilt designs.

Holiday Table Runner

Finished size is 12 1/2″ x 36 1/2″.

Materials

  • 3/8 yd white cotton
  • 1/8 yd green cotton
  • 5/8 yd red cotton for blocks and binding
  • 1/4 yd burgundy cotton
  • 1/2 yard for backing
  • 1/4 yard batting

Directions

Cut Fabric:

White cotton

  •  24 — 2  7/8 ” squares
  • 3 — 7  1/2 ” squares

Green cotton

  • 12 — 2  7/8 ″ squares

Red cotton

  • 15 — 2  7/8 ″ squares
  • 3 — 2 1/2″ x Width of Fabric strips

Burgundy cotton

  • 3 — 7 1/2 ”  squares

Background fabric

  • 1 — 14 1/2 x 38 1/2″ strip

Create the half square triangles

  • This method will create 8 half square triangles at once.
  • On the wrong side of the white 7 1/2″ square, mark the sewing and cutting lines.  Mark from corner to corner and mark half and half as shown.
  • Stitch 1/4″ away from the diagonal line, on each side of the diagonal line.  You can see the stitching in the X shape in the diagram above.
  • Cut the half square triangles apart on the marked lines.
  • Press the seams open and then square up the half square triangle blocks to measure 2 7/8″ square.

 Sew the block:

Hint:  Because you need to match seams, be sure to keep an accurate 1/4″ seam allowance and make sure blocks are square as you sew them to keep things in alignment.

table-runner

  1. Using the diagram above as a guide, arrange the pieces for your quilt block.
  2. Sew the pieces together in rows, then sew the rows together, aligning seams.
  3. Make three quilt blocks.
  4. Sew the three blocks together in a row, aligning seams to finish piecing the top of the holiday table runner.
  5. Make a quilt sandwich with the backing face down, then the batting, then your quilt top face up.
  6. Pin baste the quilt layers together.
  7. Quilt as desired.
  8. Sew the 2 1/2″ binding strips together and add to the quilt.

Variation Suggestions

  • Try some custom quilting like I did on this table runner, the smaller size makes it easy to explore free motion quilting.
    sample-runner-colors
  • Try using holiday prints or even modern colors or even a blue color scheme to really change the look but still use the same block.

This Holiday Table Runner would look great on your table or make several to give as gifts this season.  Why not look through the provided blocks in EQ Mini and find a favorite that you can turn into a table runner?  There are so many possibilities.  I would love to see pictures of your Holiday table runners.  Just tag me on instagram @lormillerdesigns.

Looking for the EQ Mini Design Instructions?  You can find them here: EQ Mini Friday Fun Holiday Table Runner.

For more projects and tips and techniques on using EQ Mini, visit my Electric Quilt blog series EQ Mini Friday Fun.

For more information on EQ Mini software, go to EQ Mini.

Sunburst Strip Piecing

Sunburst strip piecing Lori Miller Designs

In July, the Detroit Area Modern Quilt Guild hosted Lynn Harris from  The Little Red Hen for a class on strip piecing using techniques from her new book.  She also gave a wonderful trunk show of all of her scrappy quilts which were just beautiful.  I grabbed my box of orange scraps and a nice heathery grey fabric to work with.

Every Last Piece cover for blog


Lynn’s book is called Every Last Piece and she showcases 12 wonderful quilts that will use up your scrap stash.

2lynn harris class 1

Here are the strip pieces that we made in class using Lynn’s technique.  Make sure you have a lot of starch on hand!  Mine are the obvious orange ones.

lynn harris class 1

Here is our wonderful group of quilters.  Lynn is second from the left in the back and I am second from the right in the back.  The rest are all of my DAM girls.

I grabbed all of my orange strip pieced squares and decided to make half square triangles withe the heathery grey fabric.

I decided to make a runner for the Library Table I inherited from my Mother-in-Law.  It needs some love and care on the finish, so until I can make that happen, a pretty little runner should cover those up nicely.  I started to put them together in rows.

Using my trusty Bernina 630, I put on my BSR foot and started free motion quilting lines through the orange strips keeping them parallel to the seams and kind of even.  You don’t have to be perfect with this stitch and it still looks good.

P1100232

Here you can see all of the lines quilted in the orange strips, the texture is just amazing.  Then I wanted to put something in the triangle.  I wanted a design that was a bit more modern than feathers but was not having much luck finding what I wanted.  Then I found inspiration from Lori Kennedy of The Inbox Jaunt.  She had some sun and stars patterns that I adapted to the triangle.  She has tons of wonderful quilt designs and tutorials on her blog and I really love her name :).

Sunburst strip piecing Lori Miller Designs

Here is the sun pattern up close.  It is perfect to go with the orange rays in the strip piecing.  I also liked that it was a continuous design, I just quilted from triangle to triangle in a row without stopping.  Everyone is just a bit different, I did not even mark or plan too much, just quilted.  I really like it.

P1100234

Here is my finished runner, all quilted, washed and crinkly with texture.  I think it makes my library table look fabulous too.  I used a bunch of orange scraps but why does the box seem just as full when I was done as when I started?? HA HA  Happy scrap quilting!