Free Tutorial – Fiesta Quilt

Lets have a party before summer ends with this fun and cheery Fiesta Quilt!  My next tutorial is a quilt designed with EQ  Software by The Electric Quilt Company .  It uses a simple Horizontal layout with only one block.  The large 12 inch block shows off some lovely Joel Dewberry prints that I picked up from Crimson Tate at Quiltcon this year.  If you have a stack of fat quarters that you have been wanting to use, this quilt makes two blocks from each fat quarter with a single background color.  All of the varied colors give a scrappy look, so you could certainly use whatever fun fabrics you have on hand.

eqmini-nohole-sm-226x300

EQ Mini is a scaled down, simpler version of EQ7 quilt design software.  This program was created for quilters who are just getting started using software for quilt design.  EQ Mini will help you create, edit, share, and print patterns and yardage for your quilt designs.

When I designed this little quilt, I used a simple horizontal layout using just one block called the Economy Block.  I wanted a large block to show off the fabric prints that I had so I made the blocks 12 inches square.  It worked out that I could get two blocks made from each fat quarter with a little to spare.  I kept playing with the sizes of the blocks in the software to try and use as much of a fat quarter as I could.  The software lets you print how much fabric is required for a block so you can play with the sizes until it matches what fabric you have on hand.

Fiesta Quilt

Finished size is approximately 48″ x 72″

Materials

  • 12 pack of coordinating fat quarters
  • 2  1/8 yds  white fabric for the background
  • 3 yds for backing
  • 1/2 yd  blue solid for binding
  • 54″ x 80″ piece of batting

Directions

Cut Fabric:

From white background, cut:

  • 80 — 3 1/2″ squares
  • 20 — 7 1/4″ squares

From each fat quarter, cut:

  • 2 — 6 1/2″ squares
  • 8 — 3 7/8″ squares

From the binding fabric, cut:

  • 6 — 2 1/4″ strips x WOF

Make the Economy Block

  1. This block contains 4 flying geese components and there is a great way to make 4 matching flying geese.
  2. On the back side of each 3 7/8″ print square, mark a line diagonally through the center of opposite corners.
  3. Place two print squares diagonally, right sides together (RST) over one of the 7 1/4″ white background squares.  The print squares will slightly overlap. Stitch 1/4″ away from each side of the marked center line.
  4. Carefully cut between the two lines of stitching.
  5. Press towards the small print squares.
  6. Place two 3 7/8″ print squares, RST, over the two triangle units.  Stitch 1/4″ away from each side of the marked center line.
  7. Carefully cut between the two lines of stitching.
  8. Press towards the small print squares.  You will have 4 identical flying geese.

  9. Once the geese are assembled, layout all of the pieces of the block.
  10. Stitch together in rows.
  11. Trim the blocks carefully to 12 1/2″ x 12 1/2″ square.

Assemble the Fiesta Quilt top

  1. Layout your blocks in a pleasing arrangement.  You have two of each block but you can randomly lay them out.  I used this fancy design wall, ok, well it is really my bed up at the cottage.
  2. I sewed them in group of four and then put them all together.
  3. Piece together the backing so that it is about 4 inches larger than the quilt top all around.
  4. Make a quilt sandwich with the quilt top, batting and backing.
  5. Pin baste the quilt layers together.
  6. Quilt as desired.  I used an all over swirly pattern.
  7. Sew the 2 1/4″ strips together for the binding and add to the quilt.  You are finished! Time to Fiesta!

Use that fat quarter bundle from your stash or cut up some colorful scraps for this quilt.   I would love to see your Fiesta Quilt, tag me on instagram @lorimillerdesigns.

Looking for the EQ Mini Design Instructions?  You can find them HERE!

For more projects and tips and techniques on using EQ Mini, visit my Electric Quilt blog series EQ Mini Friday Fun.

For more information on EQ Mini software, go to EQ Mini.

Free Tutorial – Summer Flora Quilted Tote

Its July and summer is in full swing.  I couldn’t resist making this bright and cheery Summer Flora Tote.  It’s perfect to take to the beach, fill  up with a sewing project to work on or just tote all of your goodies in style.  This Summer Flora Tote was designed with EQ Mini Software by The Electric Quilt Company .  It uses a simple Horizontal strip layout with a couple of applique quilt block designs that will end up as the feature on each side of the tote.  Stitched in lots of bright summer colors, it reminds me of all of the flowers blooming this time of year.  Finish up this simple design with simple quilting and a fun handle.

eqmini-nohole-sm-226x300

EQ Mini is a scaled down, simpler version of EQ7 quilt design software.  This program was created for quilters who are just getting started using software for quilt design.  EQ Mini will help you create, edit, share, and print patterns and yardage for your quilt designs.

When I designed this little quilt, I used a simple horizontal strip layout with borders.  I just added two quilt blocks that when assembled would become the sides of the tote.

Summer Flora Quilted Tote

Finished size is approximately 14″ W x 14 1/2″ T x 5″ D

Materials

  • 1 pack of 5″ charm squares or at least 28 – 5″ squares (I used some Bali Snaps by Hoffman Fabrics)
  • 1/8 yd of bright green solid
  • 1  1/4 yd Grey Linen
  • 1  1/4 yd of coordinating print for lining
  • 1  1/2 yd of  muslin for backing
  • 1 1/2 yd of Fusible Web (like Pellon 805 Wonder Under or Pellon Lite EZ Steam II)
  • 20″ x 49″ piece of Pellon FF77 Flex Foam
  • 4 – 1″ D rings
  • 2 handles with lobster clips
  • Summer Flora Tote Templates

Directions

Cut Fabric:

From bright green solid, cut a 6″ x 10″ rectangle

From Grey Linen, cut:

  • 1 — 5 1/2″ x 14 1/2″ strip
  • 2 — 3 1/2″ x 33 1/2″ strips
  • 2 — 14 1/2″ x 14 1/2″ squares
  • 2 — 3 1/2″ x 19 1/2″ strips
  • 4 – 2″ x 4″ strips for handle tabs

From lining fabric

  • 1 — 18 1/2″  x 36″ rectangle

From fusible web, cut:

  • 28 — 4 1/2″ squares
  • 1 — 5 1/2″ x 9 1/2″ rectangle

Make the Applique Blocks

  1. Download and print out the Summer Flora Tote Templates.  If you plan on machine appliqueing the stems and leaves, you can cut off the outside seam allowance before tracing the templates.
  2. Press the large piece of fusible web to the wrong side of the bright green stem rectangle.
  3. Using the stem template A, trace and cut out 8 stems.
  4. Press the 4 1/2″ fusible web to the wrong side of 28 – 5″ charm squares.
  5. Using the leaf template B, trace 2 leaves onto each charm square and cut them out.
  6. Using the block diagram as a visual guide, arrange the stems and leaves on each of the 14 1/2″ linen squares.
  7. I folded and pressed the squares diagonally to get guidelines to use.
  8. Once you have the arranged the leaves and have the design how you like it, set aside the leaves at the top of the stems and press the remaining stems and leaves onto the linen square.
  9. Using a small zigzag stitch, applique around the stems and leaves.  I used a length of .9 mm and a stitch width of 2.5 mm.
  10. Hint, when you are machine applique stitching the points of the leaves, narrow the stitch width to 2.0 mm just at the points.
  11. Once you have appliqued the stems and leaves, arrange the leaves on the top of the stems and press down.
  12. Machine applique the remaining leaves.

Assemble the Tote top

  1. Sew the 5 1/2″ x 14 1/2″ linen center strip between the two appliqued squares.  Press to one side and top stitch if desired.
  2. Sew the 3 1/2″ x 33 1/2″ strips to each side of the applique unit.  Press to one side and top stitch if desired.
  3. Prepare the loops for the handles.  Fold in half  the long way and press a crease.  Open back up and fold each raw edge to the center.  Topstitch close to the folded edges.  Topstitch on the other side to match.
  4. Slide the d ring over the strip and fold in half.  Position the d ring and strip 6″ from the edge of the tote and baste into the seam.  Repeat for the 3 other loops.
  5. Sew the 3 1/2 ” x 20 1/2″ linen strips to the top and bottom of the applique unit.  Press to one side.  Topstitch close to the seam.
  6. Mark the quilt top if you want to quilt the 2 ” diamond pattern like I did.  I used a washable white marking pen.
  7. Make a quilt sandwich with the muslin, flex foam and the top applique unit.
  8. Pin baste the quilt layers together.
  9. Quilt as desired.

Finish the tote

  1. Trim tote to 19 1/2″ x 39 1/2″.  Only on the top ends of the tote, trim the flex foam to be 1 inch shorter than the outside of the tote.  You will be folding the top of the tote down into the inside over the flex foam.
  2. Fold the tote in half, right sides together (RST) and pin aligning seams.
  3. Stitch the sides and bottom of the tote.
  4. Box each corner and measure up 2 1/2″ from the point and stitch across the tote a 5″ long seam.  Trim seam.
  5. Fold the lining in half, RST and stitch the sides and bottom of the lining leaving an opening for turning on the side of the tote.
  6. Box each corner of the lining by measuring up 2 1/2 inches from the point and stitching across the lining corner with a 5 ” seam.  Turn the lining right side out.
  7. Tuck the lining into the tote with RST.  Pin aligning the seams.  Stitch around the top of the tote.
  8. Pull the tote right side out through the opening in the lining.
  9. Push the lining down into the tote.  The lining is shorter, so the top of the tote should fold down  to the inside of the tote about an inch or so.  Pin in place.  Top stitch along the edge of the top of the tote and again 1/4″ away.
  10. Tack the lining to the bottom sides of the tote from the inside.
  11. Attach your handles.

Use a favorite charm pack or cut up some colorful scraps for this tote.   Choose another favorite applique block or pieced block for the tote sides.  I would love to see your Summer Flora Tote, tag me on instagram @lorimillerdesigns.

Looking for the EQ Mini Design Instructions?  You can find them HERE.

For more projects and tips and techniques on using EQ Mini, visit my Electric Quilt blog series EQ Mini Friday Fun.

For more information on EQ Mini software, go to EQ Mini.

Free Tutorial – Dolce 18″ Doll Quilt

For this month’s free tutorial project, we are going mini.  A super cute and super sweet little quilt, this Dolce Doll Quilt was designed with EQ Mini Software by The Electric Quilt Company .  It uses a Vertical strip layout with an inserted pieced two by two block add a little pizzazz.  Stitched with bright aqua, fuscia and light pink solids, the quilting takes center stage to make this delightful quilt.  Even a simple design like this can be a showstopper and a sweet gift for a little one’s baby doll.

eqmini-nohole-sm-226x300

EQ Mini is the new scaled down, simpler version of EQ7 quilt design software.  This program was created for quilters who are just getting started using software for quilt design.  EQ Mini will help you create, edit, share, and print patterns and yardage for your quilt designs.

When I designed this little quilt, I used a vertical strip layout, but to be able to add the pieced row of blocks, I had to add a pieced strip.  But when I did the assembly, I did not want to cut out all those blocks, so I just did the math and cut strips.

Dolce Doll Quilt

Finished size is 18″ x 24″.

Materials

  • 1 5/8 yd Aqua
  • 1 3/8 yd Pink
  • 2 7/8 yd Fuscia
  • 5/8 yard fabric for backing
  • 20″ x 26″ piece of batting

Directions

Cut Fabric:

From each fabric, cut:

  • 2 — 3 1/2″ x 15 1/2″ strips
  • 2 — 3 1/2″ x 6 1/2″ strips
  • 16 – 1 1/4″ x 2″ rectangles

From aqua fabric

  • 3 — 2″ x WOF strips  for binding

Make Blocks

  1. Stitch 8 pairs of each color of the 1 1/2 x 2″ rectangles
  2. Arrange the pairs to make two – 2×2 blocks using the color scheme above.
  3. Sew the short 3 1/2″ strip  of the remaining color to the top of each block.
  4. Sew the long 3 1/2″ strip of the remaining color to the bottom of each block.
  5. Sew the rows of blocks together.
  6. Make a quilt sandwich with the backing face down, then the batting, then your quilt top face up.
  7. Pin baste the quilt layers together.
  8. Quilt as desired.  I did an allover circle design on the top half, a flower design in each pieced block and feathers for the lower strips.
  9. Sew the 2″ binding strips together and add to the quilt.
  10. Finish the binding and you are done!

This would be a simple quilt to use three coordinating prints or other solid colors.  It really sews up together fast and would make great holiday gifts.  I would love to see your Dolce Doll quilt, tag me on instagram @lorimillerdesigns.

Looking for the EQ Mini Design Instructions?  You can find them HERE

For more projects and tips and techniques on using EQ Mini, visit my Electric Quilt blog series EQ Mini Friday Fun.

For more information on EQ Mini software, go to EQ Mini.

 

Free Tutorial – Liberty Quilt of Valor

This Liberty Quilt of Valor is the project of the month  with a free tutorial designed with EQ Mini Software by The Electric Quilt Company .  It uses Broken dishes blocks set on point using light and dark blue prints from my stash.  The scattered triangles of red pull it together and add that pop of color along with the candy strip bias binding.  This quilt looks complicated but was easy to design and is easy to stitch together.

I belong to the Stitching Sisters Quilt of Valor group.  The mission of the Quilts of Valor Foundation is to cover service members and veterans touched by war with comforting and healing Quilts of Valor.  This quilt is made using  the traditional patriotic colors of  red, white and blue.

eqmini-nohole-sm-226x300

EQ Mini is the new scaled down, simpler version of EQ7 quilt design software.  This program was created for quilters who are just getting started using software for quilt design.  EQ Mini will help you create, edit, share, and print patterns and yardage for your quilt designs.

Liberty Quilt of Valor

Finished size is 60″ x 75″.

Materials

  • 1 5/8 yd white background
  • 1 3/8 yd Light blue
  • 2 7/8 yd dark blue
  • 1/2 yard red and blue stripe for binding
  • 4 yards fabric for backing
  • 70″ x 84″ batting

WOF = Width of Fabric

Directions

Cut Fabric:

Light blue

  • 8 — 13″ squares

Dark Blue

  • 10 — 13″ squares
  • 7 — 5 1/2″ x WOF strips  for outside border

Red

  • 2 — 13″ squares
  • 6 — 2″ x WOF strips for border

White background

  •  7 — 12 ” squares

Striped fabric

  • Cut 7 — 2 1/2″ x Width of Fabric strips

Make Blocks

Hint:  Because you need to match seams, be sure to keep an accurate 1/4″ seam allowance and make sure blocks are square as you sew them to keep things in alignment.

  1. Take one light blue 13″ square and one dark blue 13″ square and place them right sides together.
  2. Mark a line diagonally from corner to corner, both ways.
  3. Stitch 1/4″ away from the lines on both sides.
  4. Next mark two lines down the center of the block.
  5. Cut along the solid lines to create 8 half square triangle units.
  6. Press the half square triangle units open pressing to the dark fabric side.
  7. Make 7 more sets of dark and light blue half square triangle units.
  8. Make 2 more sets of half square triangle units using the dark blue and red fabrics.
  9. Mark a diagonal line on each of the white background squares.  Be careful not to stretch the bias edge.
  10. Arrange your pieces using this design as a guide.  There will be a few extra half square triangles.
  11. Sew together the individual broken dishes blocks, then sew the center together in diagonal rows, aligning edges.
  12. Piece together the red border with 45 degree seams.
  13. Cut 2 side red border strips 2″ x 62 3/4″ long.  Stitch to the sides of the quilt being careful not to stretch the bias edges of the white background.
    Hint:  You may want to stitch 1/8″ from the bias edge of the white background pieces to keep them from stretching.
  14. Cut 2 red border strips 2″ x 50 1/8″ long.  Sew to the top and bottom of the quilt.
  15. Piece together the dark blue border.
  16. Cut 2 side dark blue border strips 5 1/2″ x 65 3/4″.  Sew to the sides of the quilt.
  17. Cut 2 dark blue border strips 5 1/2″ x 60 1/2″.  Sew to the top and bottom of the quilt.
  18. Piece together the backing.
  19. Make a quilt sandwich with the backing face down, then the batting, then your quilt top face up.
  20. Pin baste the quilt layers together.

  21. Quilt as desired.  I echoed the seam lines for the half square triangles.  I added feathers for the white background space and quilted a large chain in the dark blue border.
  22. Sew the 2 1/2″ binding strips together and add to the quilt.
  23. Finish the binding and you are done!

Make it scrappy!  I used up light and dark blue fabrics from my stash to give this quilt a scrappy look.  You can too.  Or you can use 8 light blue fat quarters, 10 dark blue fat quarters and 2 red fat quarters for the center blocks.

This quilt meets the guidelines for a quilt of valor, but it would make a great patriotic quilt for your home too.  Change up the colors to match a bedroom or even in your favorite team’s colors.  I would love to see your Liberty quilt, tag me on instagram @lorimillerdesigns.

Looking for the EQ Mini Design Instructions?  You can find them HERE

For more projects and tips and techniques on using EQ Mini, visit my Electric Quilt blog series EQ Mini Friday Fun.

For more information on EQ Mini software, go to EQ Mini.

Free Tutorial – Lucky Shamrock Pillows

I am feeling lucky!  I have two new lovely Shamrock Pillows to decorate for St. Patrick’s Day all designed with EQ Mini Quilt Design Software by The Electric Quilt Company.  For these pillows I used the pieced Shamrock quilt block, but used two different sizes and some sashing.  These pillows finish at 18″ square.  I used my favorite technique which is to quilt the top and use an envelope back and then bind all around the pillow.  Then I just have a bunch of pillow covers that I can change out with my very neutral grey couch.  I love it!

eqmini-nohole-sm-226x300

EQ Mini is the new scaled down, simpler version of EQ7 quilt design software.  This program was created for quilters who are just getting started using software for quilt design.  EQ Mini will help you create, edit, share, and print patterns and yardage for your quilt designs.

Lucky Shamrock Pillows

Finished size is 18″ square

Materials

  • 1/2 yd green plaid
  • 1/2 yd linen for background
  • 1  1/2 yd shamrock print
  • 5/8 yd muslin
  • 5/8 yd batting

Directions

Cut Fabric:

Green Plaid

  • 4 — 7 1/2″ squares (A)
  • 16 — 3 1/2″ x squares (E)
  • 4 — 2 1/2″ x  WOF strips for binding

Linen

  • 12 — 2 1/2″ x squares (B)
  • 5 — 2 1/2″ x 14 1/2″ strips (C)
  • 4 — 2 1/2″ x 18 1/2″ strips (D)
  • 48 — 1 1/2″ squares (F)
  • 2 — 2 1/2″ x 6 1/2″ strips (G)

Shamrock Print

  • 4 — 18 1/2″ x 24″ rectangles

Muslin

  • 2 — 19″ squares

Batting

  •  2 — 19″ squares

 

Piece the large Shamrock Pillow

  1. Place a 2 1/2″ linen square (B) on a corner of a large shamrock leaf (A).  Sew a diagonal corner.  Mark a diagonal line onto the wrong side of the square with a pencil or water soluble marker.  With right sides together (RST), stitch the square onto the leaf on the marked diagonal line. Trim the excess to a 1/4″ seam allowance.  Press seam to the darker fabric side.
  2. Sew a diagonal corner to 3 of the corners on each of the four large shamrock leaves.
  3. Sew the four leaves together to form the shamrock matching the seams.
    large-shamrock
  4. Add the outside border by sewing two 14 1/2″ linen strips (C) to the side of the shamrock.  Sew two 18 1/2″ linen strips (d) to the top and bottom of the shamrock.  Set aside.

 

Piece the smaller shamrocks pillow

  1. Place a 1 1/2″ linen square (F) on a corner of a small shamrock leaf (E).  Sew a diagonal corner using the same instructions as for the larger shamrock.
  2. Sew a diagonal corner on 3  corners of each small shamrock leaf (16 total leaves)
  3. Sew four leaves together as shown to form a shamrock matching the seams.  Repeat for the other 3 small shamrocks.
    small-shamrock
  4. Sew the sashing.  Stitch a 6 1/2″ linen strip (G) between two small shamrocks.  Repeat for remaining two small shamrocks.
  5. Sew a 14 1/2″ linen strip (C) in the center of the pillow to join the two shamrock panels.  Sew a 14 1/2″ linen strip (C) to each side of the shamrocks.
  6. Sew an 18 1/2″ linen strip (D) to the top and bottom of the pillow.

Hint: If you used linen, baste very close to the outside edge of the pillow top to keep the linen from fraying.

Quilt the top side of the pillows

  1. Layer pillow top with the muslin, batting and pillow top, right side up.
  2. Pin baste the quilt layers together.
  3. Quilt as desired.  Trim quilted pillow top to 18 1/2″ square.

Note:  I found this Celtic Shamrock design for a tattoo on the internet, it had a nice continuous design I could adapt for the quilting.  Inspiration comes from all sorts of places!

Here is the beginning of the design.

Here you can see the design on one of the little shamrocks.

And here is the design on the shamrocks with the detail on the linen as well.  The texture crinkled so well after washing.

Finish the Pillow

  1. Fold each 18 1/2″ x 24″ rectangle in half, wrong sides together, to form four 12″ x 18 1/2″ rectangles. Press.
  2. Top stitch along the folded edge of the pillow about 1/2″ away from the fold.
  3. Place the quilted pillow top, right side down.
    pillow-back
  4. Place two folded rectangles over each pillow, overlapping the folded edges in the center by about 4″.
  5. Baste 1/8″ along the outside of the layers.
  6. Bind with the green plaid binding strips.
  7. Insert a pillow form through the opening.

.shamrock-pillow-2   shamrock-pillow-1

Here are pictures from EQ Mini of my quilt design.

Show me pictures of your lucky pillows!  Tag me on Facebook or Instagram @lorimillerdesigns

Looking for the EQ Mini Design Instructions?  You can find them HERE!

For more projects and tips and techniques on using EQ Mini, visit my Electric Quilt blog series EQ Mini Friday Fun.


For more information on EQ Mini software, go to EQ Mini.

Tutorial – Winter Icicles Throw Quilt

This months free tutorial for a project designed with EQ Mini Software by The Electric Quilt Company is this icy blue Winter Icicles Throw Quilt.  It uses vertical strips of giant flying geese to create modern icicles.  This frosty quilt will keep you cozy warm and the large pieces will stitch up quickly.  I even used a blue polkadot binding that made me think of little snowflakes.

eqmini-nohole-sm-226x300

EQ Mini is the new scaled down, simpler version of EQ7 quilt design software.  This program was created for quilters who are just getting started using software for quilt design.  EQ Mini will help you create, edit, share, and print patterns and yardage for your quilt designs.

Winter Icicles Throw Quilt

Finished size is 48″ x 56″.

Materials

  • 3 5/8 yd white background
  • 1 3/8 yd Light blue
  • 1 3/8 yd medium blue
  • 1 3/8 yd dark blue
  • 1/2 yard blue polkadot for binding
  • 3 1/2 yards flannel for backing
  • 54″ x 62″ batting
  • Icicle Templates (Download HERE) (Please note there is a 1/4″ seam  allowance printed around the templates so be careful when cutting them out to include that.)

Directions

Cut Fabric:

White background

  •  14 — 4 3/4 ” x 9 1/2″ rectangles
  •  8 — 4 3/4 ” x 15 3/4″ rectangles
  •  10 — 4 3/4 ” x 13″ rectangles

Light blue

  • 14 — Template A triangles

Dark Blue

  • 8 — Template B Triangles

Medium Blue

  • 10 — Template C Triangles

Blue Polkadot

  • Cut 7 — 2 1/2″ x Width of Fabric strips

 

Make Icicle Blocks

Hint:  Because you need to match seams, be sure to keep an accurate 1/4″ seam allowance and make sure blocks are square as you sew them to keep things in alignment.

  1. Take the 4 3/4″ x 9 1/2″ rectangles and stack them in two’s right sides together.
    icicle background
  2. Cut diagonally from the upper left corner to the bottom right corner.
  3. Cut off 1 inch from the pointy skinny end.
    icicle-diagram-2
  4. Using left and right pieces, carefully sew the sides onto the template A Icicle.icicle-diagram-3
  5. Continue to make a total of 14 Template A icicle blocks.
  6. Using the same method above, take the dark blue 4 3/4″ x 15 3/4″ rectangles and stack them in two’s right sides together.
  7. Cut diagonally from the upper left corner to the bottom right corner.
  8. Cut off 1 inch from the pointy skinny end.
  9. Using left and right pieces, carefully sew the sides onto the Template B Icicle.
    icicle-diagram-4
  10. Continue to make a total of 8 template B icicle blocks.
  11. Using the same method above, take the medium blue 4 3/4″ x 13″ rectangles and stack them in two’s right sides together.
  12. Cut diagonally from the upper left corner to the bottom right corner.
  13. Cut off 1 inch from the pointy skinny end.
  14. Using left and right pieces, carefully sew the sides onto the template C Icicle.
    icicle-diagram-5
  15. Continue to make a total of 10 template C icicle blocks.winter-icicles
  16. Sew the icicle blocks together in vertical rows per the diagram above.
  17. Sew the pieces together in vertical rows, then sew the rows together, aligning edges.
  18. Piece together the backing.
  19. Make a quilt sandwich with the backing face down, then the batting, then your quilt top face up.
  20. Pin baste the quilt layers together.
  21. Quilt as desired.  I used organic wavy lines.
  22. Sew the 2 1/2″ binding strips together and add to the quilt.

Variation Suggestions
winter-icicles-reverse

  • Reverse the background and icicle colors for a different look or color in a scheme to match your decor.
  • Try using frosty winter prints, the large icicles really show off larger prints.

This quick throw is perfect to snuggle under with a cup of cocoa and your favorite book this winter.  It will look perfect with my January snowman decor.  I would love to see your icicle quilt, tag me on instagram @lormillerdesigns.

Looking for the EQ Mini Design Instructions?  You can find them HERE

For more projects and tips and techniques on using EQ Mini, visit my Electric Quilt blog series EQ Mini Friday Fun.

For more information on EQ Mini software, go to EQ Mini.

New Gig: EQ Mini Friday Fun with Lori

fridayfun-logo1

I am so honored to be the host of EQ Mini Friday Fun with Lori. This is a blog series devoted to sharing, teaching, and providing information the new scaled down, simpler version of EQ7 quilt design software.  This program was created for quilters who are just getting started using software for quilt design.  EQ Mini will help you create, edit, share, and print patterns and yardage for your quilt designs.  EQ Mini was created by The Electric Quilt Company.  You can find my Friday Fun on the DoYouEQ.com blog.

eq-mini-start-new-quilt-tab

I was introduced to EQ Mini when I volunteered to beta test the software before it was released.  I was so impressed with the easy flow and friendly beginner aspects of the software.  I love the colored step by step tabs that let you easily work to create and edit a design.  And even though it is a Mini version of the Electric Quilt 7 software, it is still robust enough to offer a ton of design possibilities. It contains a block library of 300 pieced and appliqué blocks that can be set in 4 layout styles, there are 8 different border styles and a fabric library of over 3500 scanned fabrics to use to make your designs exactly how you want them.  There are a slew of add on blocks you can purchase as well as fabric stash libraries to add even more options for your software.

eqmini-nohole-sm-226x300

Each month I will share tips and techniques, tutorials, design project skill builders, and maybe even a little show and tell of what I am working on in my studio.  Head on over to doyoueq.com for My helpful EQ Mini designs posts, then come back here.  I will share take those designs and share tutorials to help you transform the design into beautiful stitched projects.