Free Tutorial – Shipmates Bench Pillow

Ahoy!  It is summer and that means sewing projects that are fun, easy and quick to stitch up.  That leaves you plenty of time to soak up the sun and play in the outdoors.  This nautical themed pillow is designed to sit on an outdoor bench or decorate a bench in your home.  It was designed with Electric Quilt 8 using a Horizontal Strip quilt layout.  With some very easy shortcut piecing and machine applique, you can make this pillow up in an afternoon.  Enjoy!

Shipmates Bench Pillow

Finished size is 16″ x 28″

Materials

  • 1/2 yd light blue fabric
  • 1/8 yd navy blue fabric
  • 1/2 white fabric
  • 1 yd backing print
  • 1/4 yd red fabric for binding
  • 1/2 yd muslin
  • 1/2 yd batting or 20″ x 32″ piece

Directions

Cut Fabric:

Light Blue

  • 1 — 16 1/2″ square
  • 2 — 4 1/2″ x 16 1/2″ rectangles

Navy Blue

  • 2 — 6 ” squares

White

  • 2 — 6 ” squares
  • 1 — 16 ” square

Red

  • 3 — 2 1/4″ x  WOF strips for binding

Printed Backing

  • 2 — 18″ x 33″ rectangles

Muslin

  • 1 — 18″ x 30″ rectangle

Batting

  • 1 — 18″ x 30″ rectangle

Water Soluble Marker or Pencil

1 — 16″ square of double sided fusible web

Anchor Template

 

 

Piece the Pillow Top

  1. Make the half square triangles to resemble a rope design.  Take the two white 6″ squares and  mark them from corner to corner.
  2. Place the white square right sides together with the navy blue 6″ squares.  Stitch 1/4″ away from each side of the diagonal marked lines.
  3. Carefully cut the squares on the diagonal lines and then in half both ways as in diagram above.  This will create 8 half square triangles for each square for a total of 16.
  4. Press the seams to the darker fabric.  Trim the blocks to 2 1/2″ square.
  5. Stitch the half square triangles together in groups of two to start, then piece them all together to form the rope strips.  I stitched both in the same directions.  Set aside.
  6. Next, print out  the anchor template and tape it together using the guidelines.  Using a light box or a window, trace the anchor outline to one side of the fusible web.  Press the fusible web according to the manufacturers instructions to the wrong side of the white fabric 16″ square.  Carefully cut out your anchor applique.  Peel off any backing.
  7. Position the anchor in the center of the 16 1/2″ light blue square.  One you have it where you like it, press the anchor onto the center of the pillow.
  8. Now applique around the outside edge of your anchor to finish the applique.  You may need to use some stabilizer underneath the design as you stitch so that the background fabric does not pucker.  Use a light tear away or other stabilizer of your choice.  I used  a zig zag stitch that was a little bit larger than a satin stitch.  For the points, I taper the stitch down before I turn.
  9. Next assemble all of the strips to create the pillow top.

Quilt the pillow top

  1. Layer pillow top with the muslin, batting and pillow top, right side up.
  2. Pin baste the quilt layers together.
  3. Quilt as desired.  I used painters tape to mark diagonal lines and then I quilted straight lines diagonally.  Trim the pillow top to 16 1/2″ x 28 1/2″.  It might be slightly smaller depending on how much quilting you did. 

Finish the Pillow

  1. Fold each 18 ” x 33″ background print rectangle in half, wrong sides together, to form two 18″ x 16 1/2″ rectangles. Press.
  2. Top stitch along the folded edge of the pillow about 1/2″ away from the fold.
  3. Place the quilted pillow top, right side down.pillow-back
  4. Place two folded rectangles over each pillow, overlapping the folded edges in the center by about 4″.
  5.  Baste 1/8″ along the outside of the layers.  Trim.  Don’t you love this cute print that matches the applique so perfectly?  I found it in my stash.
  6.  Bind with the red binding strips.
  7.  Finish by inserting a pillow form through the opening.

 

I would love to see pictures of your Shipmates pillows!  Tag me on Facebook or Instagram @lorimillerdesigns

Looking for the EQ8 Design Instructions?  You can find them HERE!

For more projects and tips and techniques on using EQ8, visit my Electric Quilt blog series EQ8 Lessons with Lori.

For more information on EQ8, go to Electric Quilt 8 Software.

Free Tutorial: Stardrop Table Topper

This fun Octagon shaped Stardrop Table Topper was designed with EQ8 Quilt Design Software by The Electric Quilt Company .  This tutorial takes that design and gives you the information to make it yourself.  This is a very easy beginner foundation pieced mini quilt but it is helpful to have some basic knowledge of paper piecing.  you will assemble eight units to combine to create the top of this little quilt.  I made this with gradations of aqua and teal solid cotton fabrics and the background is a lovely linen.  This is the perfect base for your table centerpiece.

Stardrop Table Topper

Finished size is approximately 24″ x 24″

Materials

  • 1/8 yd of light aqua cotton
  • 1/8 yd of medium aqua cotton
  • 1/8 yd of teal cotton
  • 1 yd for background, backing and binding
  • 28″ square piece of batting
  • Stardrop Template 1
  • Stardrop Template 2
  • 16 sheets of EQ printable Foundation Sheets or other foundation paper

HINT:  Have you tried printing on EQ Printables Foundation Sheets?  EQ has 25 sheet packages of special nonwoven material that you can run through your printer just like paper.  It tears away easily, is translucent and won’t dull machine needles. If you don’t want to print, you can also use a pen, pencil or marker to draw your template onto the paper.  Electric Quilt generously provided the foundation sheets for this project.

Directions

Cut Fabric:

From light aqua, cut:

  • 8 — 4 1/2 ” x 5″ rectangles

From medium aqua, cut:

  • 8 — 5″ x 7″ rectangles

From dark teal, cut:

  • 8 — 5″ x 10″ rectangles

From the dark linen, cut:

  • 1 – 28″ square for the backing
  • 16 — 2 1/2″ x 6″ rectangles for top template background
  • 16 — 3″ x 7″ rectangles for bottom template background
  • 8 — 2″ x 11″ strips for bottom template background
  • 95″ x 2 1/4″ strips for binding (can be pieced together)

 

Paperpiecing

 

  1. Use a pencil to trace the foundation pattern once onto EQ Printables Foundation sheets or other lightweight copy or foundation piecing paper of your choice. You can also print a copy of the foundation pattern onto lightweight copy or foundation piecing paper.  EQ generously provided the foundation sheets for this project.  The sheets feel like a soft stabilizer, they easily went through my inkjet printer.  I like that you can see through them so it is easy to match up fabrics from the backside.  It is super easy to sew through and it is not as stiff as paper.
  1. Use a very short machine stitch, I use 1.8 mm so the paper will tear off easily later.
  1. To foundation paper piece, stitch fabric pieces to a foundation paper with the marked side of the paper facing up and the fabric pieces layered underneath. The resulting pieced unit is a mirror image of the foundation paper.

  1. Using the larger template and starting in the number order, place the first two fabric pieces, RST, on the back side of the foundation paper with the edges of the fabrics extending ¼” beyond the first stitching line. The first stitching line is between section A1 and A2.
  1. Holding the pieces in place, stitch from the top side on the line between the two areas, starting and stopping just past the seam allowances.
  2. Above,  you see the back side of the pieces we just stitched.
  3. Flip the piece back over and fold the paper back on the line you just sewed.
  4. Using a ruler, trim the seam to 1/4″. Be careful not to cut through your paper template.
  5. Fold the paper back and flip it over again.
  6. Open out the piece and press the seam. The right sides of the fabrics will show on the back side of the paper template.
  7. Continue to add pieces in order step by step until you have finished the bottom template.
  8. Trim the bottom template around the outside seam allowance on the paper.
  9. Use the same method to sew the top template pieces.
  10. Carefully sew the top and bottom foundation templates together.  You should have a total of 8 triangle shapes.
  11. Sew together the paper pieced shapes, two at a time, aligning seams and points.
  12. Then stitch together the pieces to form two halves.  Now you can sew together the two halves, aligning the center points and seams.
  13. Carefully tear off the foundation pattern when you have finished the block

Assemble the Stardrop Table Topper

  1. Make a quilt sandwich with the quilt top, batting and backing.
  2. Baste the quilt layers together.
  3. Quilt as desired.  I used some free motion feathers and leafy motifs in the triangles.
  4. Sew the 2 1/4″ strips together for the binding and add to the quilt.  You are finished!

I would love to see your Stardrop Table Topper Quilt, tag me on instagram @lorimillerdesigns.

Looking for the EQ8 Design Instructions?  This quilt was designed in two parts, follow the links below:

EQ8 Stardropper Table Topper Design – Part 1

EQ8 Stardropper Table Topper Design – Part 2

For more projects and tips and techniques on using EQ8, visit my Electric Quilt blog series EQ8 Lessons with Lori.

For more information on EQ8, go to Electric Quilt 8 Software.

Free Tutorial – Scrappy Toddler Tumbler Quilt

This tutorial is an adorable toddler quilt designed with EQ8 Software by The Electric Quilt Company .  Running about 45″ square, it’s a One Block quilt using the Tumbler shape.  I was able to use my Sizzix Bigz L Die Tumbler that is 5″ x 5″ to make my blocks but I also include templates if you don’t have a die cutter machine.

The super cute woodland animal print I had is the feature fabric and then I used fabric from my stash to give it that scrappy look.

This quilt was designed with the new updated Electric Quilt 8 design software.  This version is more intuitive and easy to use and still has all the great things you expect from Electric Quilt.

 

When I designed this little quilt, I used the one block design from Electric Quilt and it allowed me to edit the Tumbler shape and size in my design so it matched the tumbler blocks I die cut with my Sizzix cutter.  You can cut a lot of very accurate blocks in a short amount of time with a die cut machine.  Don’t worry, if you don’t have a machine, I also provide templates for you to use.

Toddler Tumbler Quilt

Finished size is approximately 40″ x 40″

WOF – Width of Fabric

Materials

  • 1 yd of main print fabric
  • 3/8 yd of Seven coordinating fabrics
  • 2   yds  Background print for binding, backing and some tumblers
  • 50″ x 50″ piece of batting
  • Sizzix Die Cutter
  • Sizzix Bigz L Tumbler Die 5″x 5″ unfinished, 4 1/2″ x 4 1/2″ finished
  • Or you can use this Tumbler Template

Directions

Cut Fabric:

From background fabric, cut:

  • 1 — 54″ x WOF Rectangle for pieced backing
  • 1 54″ x WOF Rectangle for pieced backing, subcut into:
    • 1 – 12″ x 54″ strip for pieced backing
    • 4 – 2 1/2″ x 54″ strips for binding
    • Use remaining to cut approximately 14 tumbler blocks

From each of the seven coordinating prints, cut:

  • 14 Tumbler blocks

Assemble the Toddler Tumbler Quilt top

  1. Layout your tumbler blocks in a pleasing arrangement.  There are extra blocks so you can play with the placement until you like it.  There are 9 blocks in a row and 11 rows of blocks.
  2. Sew the tumbler pieces together in rows so the angled sides are on the left and right of the block.  I pressed the seams open.
  3. Then sew the rows together.  Press the seams open.
  4. Piece together the backing so that it is at least 4 inches larger than the quilt top all around.
  5. Make a quilt sandwich with the quilt top, batting and backing.
  6. Pin baste the quilt layers together.
  7. Quilt as desired.  I just straight line quilted about 1/2″ away from the seams.
  8. Sew the 2 1/2″ strips together for the binding and add to the quilt.  The angled sides are pretty gentle so you can just ease the binding around.  You are finished!

I would love to see your Toddler Tumbler Quilt, tag me on instagram @lorimillerdesigns.

Looking for the EQ8 Design Instructions?  You can find them HERE.

For more projects and tips and techniques on using EQ8, visit my Electric Quilt blog series EQ8 Lessons with Lori.

For more information on EQ8, go to Electric Quilt 8 Software.

Published – Cookie Cat

MEOW!  Cookie Cat is here, my latest quilt made to celebrate my sweet kitty, Cookie.

You can find this fun little quilt in the March 2018 issue of American Quilter Magazine.  This magazine is published by the American Quilt Society (AQS).

Note: If any of you would like to join AQS in February, you will get access to the March digital issue as soon as you join, plus you can get 6 additional issues, a full year, in print.  Also, if you join and log into americanquilter.com, all AQS members have digital access to ALL American Quilter magazines back to 2013.  I just happen to be a member, so I though I would share.

Here is the real Cookie Cat, he loves to help me with my quilting.

As usual, I designed this cutie with Electric Quilt design software.  It makes the process easy and I had quite a few iterations on this block until I got it where I liked it.

I started quilting at my cottage in Northern Michigan.  I have a well used Featherweight Singer up there and it pieces a quilt quite nicely.

I generously received cotton solid fabric from  American Made Brand to make this sweet quilt.  The pieces are sized at five inches so they are charm square friendly too.

There are two variations in the colors for the blocks.  These are large 18″ blocks.  I love a large block, easy to sew, easy to have a large quilt quickly.

Here is my fancy light box at the cottage.  Yes, its a window from the second story, so I have a lovely pine tree backdrop.  I just taped the template to the window and then moved the block to where I wanted the face and taped the block to the window.  Then I traced with a water soluble marker.  Once I had the face on, I hand embroidered the whiskers.  The little nose is a piece of fleece.

I went a little crazy with the quilting.  I wanted to try out my Babylock Jazz on a larger quilt.  It may look like a jumble, but the large throat made it easy to do free motion quilting and the walking foot quilting.

Here you can get a better idea of all of the quilting.  I made the tiny swirls so tiny around the kitty, that took me forever.  Next time, I will make those babies just a bit bigger to get it done sooner.  I cant complain too much, I do love all that texture it creates, especially since the kitty is so basic.

I have enough scraps to make a baby quilt with just four blocks.  That just might be a great idea if you want to try this block but not make a twin size quilt.  Just one block would make a super cute pillow too.

Happy Stitching!

 

 

Published – Concentric

I am proud to introduce my quilt, Concentric, which is published in Modern Quilts Unlimited Issue 22.

And I am thrilled to be listed as a top designer with some other great quilters right on the cover highlighting the circles under Geometric Gems.  Step into my studio for a little peek into behind the scenes of making this quilt.

 

I had the idea of concentric circles of color gradations and started with the traditional drunkards path block and turned it up a notch.  I used large 12″ blocks to really show off the colors.  Electric Quilt Software made it easy to try a few things with the design until I really liked it.

 

You start with the center in the lighter tone and then keep sewing each round of color for the block.  I used Michael Miller Cotton Couture Solids for the fabric.

To create the middle double blocks, you cleverly cut a finished block to add another set of color.

The fit together perfectly and you just stitch like you were sewing on another drunkards path round.

Just a picture of the teal and blue colors at the ironing board.  I was helping them with a little starch.

Here is my original design out of Electric Quilt.  I thought the borders added something and the pops of purple added some color to the asymmetric pattern.

All of those open squares were hollering for some extra quilting so I chose a unique design for each one.  I think I went though about 8 reference books I had for free motion quilting to find all of the ones I liked.  Then it was ready for some pin basting.

I went bonkers with the quilting using my Babylock Jazz.  I just wanted to try everything out.  I did a lot of marking to try a few new things. I really wanted a lot of texture.

Of course, Cookie cat comes running whenever I quilt and thinks he needs to ride along.  It can make things difficult but he is so furry purry, I can’t complain.

Here you can see that wonderful texture after washing the quilt.  The designs in the squares show pretty well too.

Another view of the finished quilting.

I hope you enjoyed your behind the scenes tour.

Happy Stitching!

 

Published – Viewfinders Eye Glass Cases

Used with permission from Quilts and More™ magazine. ©2018 Meredith Corporation. All rights reserved.

I have been published again, this time it is a fun quilt project,  paper pieced eyeglass cases with the title Viewfinders.

These fun eyeglass cases are published in the 2018 Winter Quilts and More magazine issue.

Used with permission from Quilts and More™ magazine. ©2018 Meredith Corporation. All rights reserved.

It features a great beginner paper pieced flap of little flying geese.  I used Electric Quilt to design it.  Then I used linen for the body, scraps of batting for the inside and a color coordinated binding.

Just the flap is paper pieced so it would make a great beginner project to learn paper piecing.  It also makes a great eyeglass case for a gift.

You can easily use your scraps to make these adorable cases.  Happy Stitching!

 

Published – Beach Glass Quilt

I am so excited to be published again.  This large block quilt in beach glass hues captures the feel of sand and surf while the snowflakes swirl outside.

And I was surprised to find that I am a cover girl too.  Beach glass was featured on the cover of the 2017 International Quilt Festival Magazine.

I designed this large 18″ block with Electric Quilt Software.  I wanted to show off the turquoise and sea green colors of the fabric with larger pieces.  And I wanted a pretty simple block to put together.

Here is an assembled block.  It really shows all of the low volume grey fabric scraps I was using.  They just had to be a lighter grey and I used both cream and white tones.

I started out with this large quilt design but ultimately decided to downsize it to a throw that was 3 x 4 blocks.

 

I hand marked the quilt with ideas I had for quilting.  I just use a water soluble marker to put the designs on the fabric.  If I am going to quilt right away, I sometime use the disappearing ink one.

I decided to try to mimic the medallion shape into the grey center shapes that formed when the blocks were put together.

My new Babylock Jazz sewing machine made it easy to quilt with that extra large throat.  I was able to free motion almost the whole thing.

Here you can see that wonderful texture after washing the quilt.

Another view of the finished quilting.

I think this is one of my favorites!  Thanks for letting me share. Happy Stitching!

 

Free Tutorial – Fiesta Quilt

Lets have a party before summer ends with this fun and cheery Fiesta Quilt!  My next tutorial is a quilt designed with EQ  Software by The Electric Quilt Company .  It uses a simple Horizontal layout with only one block.  The large 12 inch block shows off some lovely Joel Dewberry prints that I picked up from Crimson Tate at Quiltcon this year.  If you have a stack of fat quarters that you have been wanting to use, this quilt makes two blocks from each fat quarter with a single background color.  All of the varied colors give a scrappy look, so you could certainly use whatever fun fabrics you have on hand.

eqmini-nohole-sm-226x300

EQ Mini is a scaled down, simpler version of EQ7 quilt design software.  This program was created for quilters who are just getting started using software for quilt design.  EQ Mini will help you create, edit, share, and print patterns and yardage for your quilt designs.

When I designed this little quilt, I used a simple horizontal layout using just one block called the Economy Block.  I wanted a large block to show off the fabric prints that I had so I made the blocks 12 inches square.  It worked out that I could get two blocks made from each fat quarter with a little to spare.  I kept playing with the sizes of the blocks in the software to try and use as much of a fat quarter as I could.  The software lets you print how much fabric is required for a block so you can play with the sizes until it matches what fabric you have on hand.

Fiesta Quilt

Finished size is approximately 48″ x 72″

Materials

  • 12 pack of coordinating fat quarters
  • 2  1/8 yds  white fabric for the background
  • 3 yds for backing
  • 1/2 yd  blue solid for binding
  • 54″ x 80″ piece of batting

Directions

Cut Fabric:

From white background, cut:

  • 96 — 3 1/2″ squares
  • 24 — 7 1/4″ squares

From each fat quarter, cut:

  • 2 — 6 1/2″ squares
  • 8 — 3 7/8″ squares

From the binding fabric, cut:

  • 6 — 2 1/4″ strips x WOF

Make the Economy Block

  1. This block contains 4 flying geese components and there is a great way to make 4 matching flying geese.
  2. On the back side of each 3 7/8″ print square, mark a line diagonally through the center of opposite corners.
  3. Place two print squares diagonally, right sides together (RST) over one of the 7 1/4″ white background squares.  The print squares will slightly overlap. Stitch 1/4″ away from each side of the marked center line.
  4. Carefully cut between the two lines of stitching.
  5. Press towards the small print squares.
  6. Place two 3 7/8″ print squares, RST, over the two triangle units.  Stitch 1/4″ away from each side of the marked center line.
  7. Carefully cut between the two lines of stitching.
  8. Press towards the small print squares.  You will have 4 identical flying geese.

  9. Once the geese are assembled, layout all of the pieces of the block.
  10. Stitch together in rows.
  11. Trim the blocks carefully to 12 1/2″ x 12 1/2″ square.

Assemble the Fiesta Quilt top

  1. Layout your blocks in a pleasing arrangement.  You have two of each block but you can randomly lay them out.  I used this fancy design wall, ok, well it is really my bed up at the cottage.
  2. I sewed them in group of four and then put them all together.
  3. Piece together the backing so that it is about 4 inches larger than the quilt top all around.
  4. Make a quilt sandwich with the quilt top, batting and backing.
  5. Pin baste the quilt layers together.
  6. Quilt as desired.  I used an all over swirly pattern.
  7. Sew the 2 1/4″ strips together for the binding and add to the quilt.  You are finished! Time to Fiesta!


Use that fat quarter bundle from your stash or cut up some colorful scraps for this quilt.   I would love to see your Fiesta Quilt, tag me on instagram @lorimillerdesigns.

Looking for the EQ Mini Design Instructions?  You can find them HERE!

For more projects and tips and techniques on using EQ Mini, visit my Electric Quilt blog series EQ Mini Friday Fun.

For more information on EQ Mini software, go to EQ Mini.

New Pattern: Summer Harvest Quilt

My next pattern is ready for Sale!  Summer Harvest is a super easy Throw Quilt made from 9 1/2″ quilt blocks.  It will be the perfect project for a beginning quilter this summer.

It uses precut 10 inch squares so you can break open that fabulous pile of fabric you have been waiting to use.  It lends itself to any season, but these bright Malka Dubrowski prints really pop with the colors of the farmer’s market in summer.

This quilts was originally featured on the cover of Quick to Stitch Precuts Magazine in 2015, but now it is available as a PDF download.

The pattern is super easy and the precut 10 inch blocks and assembly instructions let you easily strip piece the blocks in a hurry.

You create these leaf style blocks and sew them together in rows and columns.

Here is the quilt top all pieces and ready for pin basting.

This was my original Electric Quilt 7 design, but I decided to add some narrow sashing between the columns to set off the bright fabrics.

I even used the scraps cut from the corners to piece the backing for this quilt.  A great way to use the leftovers.

I also quilted this throw with my Bernina 630 and some free motion quilting.  I used a cute leave motif for each block.

I hope you have as much fun making this quilt as I did!

You can purchase my Summer Harvest Pattern as a PDF download by going to the My Patterns tab and following the link to My Etsy Shop!

Thanks for letting me share!  Tag me on Instagram at lorimillerdesigns, I would love to see your version!

New Patterns – Infinity Quilt and Infinity MINI Quilt

I am pleased to share my latest two published patterns.  My Infinity Quilt and a MINI version of Infinity.

If this quilt looks familiar, you are right.  It was a featured quilt in the Spring 2016 Modern Quilts Unlimited Magazine.

I also had the privilege of showing Infinity at the 2017 International Quilt Festival Chicago in the Modern exhibit this past spring.  It was very exciting.

I have updated the Infinity pattern since the magazine to include three sizes, throw, twin and queen size.

I also love the idea of having a mini version of one of my favorite quilts.  So this little version is available as a separate pattern with a size of 24 1/2″ x 26″.

And of course I had to make a sample.  Here is a little tour of making the MINI quilt.

I need to add that  I use Electric Quilt software.  With EQ 7, I could easily size down my pattern to make this mini quilt with very little effort!  I love designing in EQ!

I did a lot of string piecing and I had to show this cute little sunflower quilts gadget to snip the threads between your string piecing.  I picked it up at the Chicago show.  So practical and cute!

There are quite a few half square triangles and I square them up as I go.

It is so fun to see the mini design come together!  I am pinning with my hello kitty box of pins.  Yeah, I got it in McDonald’s meal as a prize.

So I had just taken a class at Quiltcon for free motion feathers and I had just splurged on a new sewing machine.  A babylock Jazz!  So I had to try it out.  I mimicked the quilting I used on my large quilt.  The designs are so cute in miniature.

You can purchase my Infinity Quilt Pattern and Infinity MINI Quilt Pattern as a PDF download from MY PATTERNS tab and following the link to My Etsy Shop!

Thanks for letting me share!  Tag me on Instagram at lorimillerdesigns, I would love to see your version!

Free Tutorial – Dolce 18″ Doll Quilt

For this month’s free tutorial project, we are going mini.  A super cute and super sweet little quilt, this Dolce Doll Quilt was designed with EQ Mini Software by The Electric Quilt Company .  It uses a Vertical strip layout with an inserted pieced two by two block add a little pizzazz.  Stitched with bright aqua, fuscia and light pink solids, the quilting takes center stage to make this delightful quilt.  Even a simple design like this can be a showstopper and a sweet gift for a little one’s baby doll.

eqmini-nohole-sm-226x300

EQ Mini is the new scaled down, simpler version of EQ7 quilt design software.  This program was created for quilters who are just getting started using software for quilt design.  EQ Mini will help you create, edit, share, and print patterns and yardage for your quilt designs.

When I designed this little quilt, I used a vertical strip layout, but to be able to add the pieced row of blocks, I had to add a pieced strip.  But when I did the assembly, I did not want to cut out all those blocks, so I just did the math and cut strips.

Dolce Doll Quilt

Finished size is 18″ x 24″.

Materials

  • 3/8 yd Aqua
  • 1/4 yd Pink
  • 1/4 yd Fuscia
  • 7/8 yard fabric for backing and binding
  • 20″ x 26″ piece of batting

Directions

Cut Fabric:

From each fabric, cut:

  • 2 — 3 1/2″ x 15 1/2″ strips
  • 2 — 3 1/2″ x 6 1/2″ strips
  • 16 – 1 1/4″ x 2″ rectangles

From aqua fabric

  • 3 — 2″ x WOF strips  for binding

Make Blocks

  1. Stitch 8 pairs of each color of the 1 1/2 x 2″ rectangles
  2. Arrange the pairs to make two – 2×2 blocks using the color scheme above.
  3. Sew the short 3 1/2″ strip  of the remaining color to the top of each block.
  4. Sew the long 3 1/2″ strip of the remaining color to the bottom of each block.
  5. Sew the rows of blocks together.
  6. Make a quilt sandwich with the backing face down, then the batting, then your quilt top face up.
  7. Pin baste the quilt layers together.
  8. Quilt as desired.  I did an allover circle design on the top half, a flower design in each pieced block and feathers for the lower strips.
  9. Sew the 2″ binding strips together and add to the quilt.
  10. Finish the binding and you are done!

This would be a simple quilt to use three coordinating prints or other solid colors.  It really sews up together fast and would make great holiday gifts.  I would love to see your Dolce Doll quilt, tag me on instagram @lorimillerdesigns.

Looking for the EQ Mini Design Instructions?  You can find them HERE

For more projects and tips and techniques on using EQ Mini, visit my Electric Quilt blog series EQ Mini Friday Fun.

For more information on EQ Mini software, go to EQ Mini.

 

Published – Baby Raccoon Bandit Quilt

This little sweet Baby Quilt with the Raccoon Bandit has been published in Fons and Porter’s Easy Quilts Summer 2017 Magazine.  I am happy to share this cozy little cutie with you.

My girlfriend called to say she had received her newest issue and had found my original pattern.  It is always a nice surprise since you make your quilt months in advance for the Magazine and have to wait for the published issue to arrive.

I used EQ7 to design this quilt.  I was able to upload swatches of the actual fabric I was going to use and get a good idea of what the quilt would look like.  Northcott Fabrics generously provided the material which was a gorgeous, heavy weight flannel.  I used prints from TeePee Time by Deborah Edwards that had a super cute little raccoon in the design and I coordinated with Toscana flannels also by Deborah Edwards that has a nice mottled look that blends well with the prints.  These sewed and washed up beautifully and they have a very nice hand feel.

For this quilt, because I had some interesting piecing directions I wanted to try, I made a prototype quilt.  And I made him super modern, a blue raccoon!

I print out the rotary cutting directions from EQ7 and then I adjust them based upon how I want to assemble the quilt using my quilting knowledge.  I like to avoid bias edges and make things as easy as possible to assemble.  So I write up all my notes as I sew.

Here is my Baby Blue Bandit.  It just gives you an idea of how by just changing colors, you can make lots of different styles from one pattern.

I used some simple constructions shortcuts to make this giant 20″ block even faster.  There is only one template for the ears.  I loved this cute little critter, I hope you enjoy making one too!

Thanks for letting me share!  Happy Stitching!

Free Tutorial – Liberty Quilt of Valor

This Liberty Quilt of Valor is the project of the month  with a free tutorial designed with EQ Mini Software by The Electric Quilt Company .  It uses Broken dishes blocks set on point using light and dark blue prints from my stash.  The scattered triangles of red pull it together and add that pop of color along with the candy strip bias binding.  This quilt looks complicated but was easy to design and is easy to stitch together.

I belong to the Stitching Sisters Quilt of Valor group.  The mission of the Quilts of Valor Foundation is to cover service members and veterans touched by war with comforting and healing Quilts of Valor.  This quilt is made using  the traditional patriotic colors of  red, white and blue.

eqmini-nohole-sm-226x300

EQ Mini is the new scaled down, simpler version of EQ7 quilt design software.  This program was created for quilters who are just getting started using software for quilt design.  EQ Mini will help you create, edit, share, and print patterns and yardage for your quilt designs.

Liberty Quilt of Valor

Finished size is 60″ x 75″.

Materials

  • 1 5/8 yd white background
  • 1 3/8 yd Light blue
  • 2 7/8 yd dark blue
  • 3/4 yd solid red for triangles and thin border
  • 1/2 yard red and blue stripe for binding
  • 4 yards fabric for backing
  • 70″ x 84″ batting

WOF = Width of Fabric

Directions

Cut Fabric:

Light blue

  • 8 — 13″ squares

Dark Blue

  • 10 — 13″ squares
  • 7 — 5 1/2″ x WOF strips  for outside border

Red

  • 2 — 13″ squares
  • 6 — 2″ x WOF strips for border

White background

  •  7 — 12 ” squares

Striped fabric

  • Cut 7 — 2 1/2″ x Width of Fabric strips

Make Blocks

Hint:  Because you need to match seams, be sure to keep an accurate 1/4″ seam allowance and make sure blocks are square as you sew them to keep things in alignment.

  1. Take one light blue 13″ square and one dark blue 13″ square and place them right sides together.
  2. Mark a line diagonally from corner to corner, both ways.
  3. Stitch 1/4″ away from the lines on both sides.
  4. Next mark two lines down the center of the block.
  5. Cut along the solid lines to create 8 half square triangle units.
  6. Press the half square triangle units open pressing to the dark fabric side.
  7. Make 7 more sets of dark and light blue half square triangle units.
  8. Make 2 more sets of half square triangle units using the dark blue and red fabrics.
  9. Mark a diagonal line on each of the white background squares.  Be careful not to stretch the bias edge.
  10. Arrange your pieces using this design as a guide.  There will be a few extra half square triangles.
  11. Sew together the individual broken dishes blocks, then sew the center together in diagonal rows, aligning edges.
  12. Piece together the red border with 45 degree seams.
  13. Cut 2 side red border strips 2″ x 62 3/4″ long.  Stitch to the sides of the quilt being careful not to stretch the bias edges of the white background.
    Hint:  You may want to stitch 1/8″ from the bias edge of the white background pieces to keep them from stretching.
  14. Cut 2 red border strips 2″ x 50 1/8″ long.  Sew to the top and bottom of the quilt.
  15. Piece together the dark blue border.
  16. Cut 2 side dark blue border strips 5 1/2″ x 65 3/4″.  Sew to the sides of the quilt.
  17. Cut 2 dark blue border strips 5 1/2″ x 60 1/2″.  Sew to the top and bottom of the quilt.
  18. Piece together the backing.
  19. Make a quilt sandwich with the backing face down, then the batting, then your quilt top face up.
  20. Pin baste the quilt layers together.

  21. Quilt as desired.  I echoed the seam lines for the half square triangles.  I added feathers for the white background space and quilted a large chain in the dark blue border.
  22. Sew the 2 1/2″ binding strips together and add to the quilt.
  23. Finish the binding and you are done!

Make it scrappy!  I used up light and dark blue fabrics from my stash to give this quilt a scrappy look.  You can too.  Or you can use 8 light blue fat quarters, 10 dark blue fat quarters and 2 red fat quarters for the center blocks.

This quilt meets the guidelines for a quilt of valor, but it would make a great patriotic quilt for your home too.  Change up the colors to match a bedroom or even in your favorite team’s colors.  I would love to see your Liberty quilt, tag me on instagram @lorimillerdesigns.

Looking for the EQ Mini Design Instructions?  You can find them HERE

For more projects and tips and techniques on using EQ Mini, visit my Electric Quilt blog series EQ Mini Friday Fun.

For more information on EQ Mini software, go to EQ Mini.

Published – Steppin’ Up Quilt

I am pleased to share my latest published Quilt, Steppin’ Up in the 2017 issue of Quiltcon Magazine.  It arrived mid-February so I am a little behind in sharing this striking beauty.


I had an idea of a step ladder and all the possibilities of meaning that is could represent.  It could symbolically represent a promotion, taking charge or great success.

I started out designing my pillow with Electric Quilt 7, quilt design software.  It really made it easy to bring my design to life.  I wanted it to be asymmetric to create movement and interest.

I also made it easy with 2 1/2″ strips to put together.  you need to use a good 1/4″ seam.  It is important or you may spend an entire evening ripping out over 100 seams to sew over again.  Don’t ask me how I know.

I opted for just a three color combination of brown, fuscia and green.  They looked so good together.

I used some simple constructions shortcuts to make this block even faster.  No templates!

I found this great print that coordinated beautifully for the backing of the quilt.  And it looks very modern too!

I used organic wavy lines to quilt this throw size quilt.  I used a complimentary green thread and it looked great.

 

I used all of the leftover pieces to make two matching pillows.  Another lovely set for my family room couch.

Thanks for letting me share!  Happy Stitching!

Free Tutorial – Lucky Shamrock Pillows

I am feeling lucky!  I have two new lovely Shamrock Pillows to decorate for St. Patrick’s Day all designed with EQ Mini Quilt Design Software by The Electric Quilt Company.  For these pillows I used the pieced Shamrock quilt block, but used two different sizes and some sashing.  These pillows finish at 18″ square.  I used my favorite technique which is to quilt the top and use an envelope back and then bind all around the pillow.  Then I just have a bunch of pillow covers that I can change out with my very neutral grey couch.  I love it!

eqmini-nohole-sm-226x300

EQ Mini is the new scaled down, simpler version of EQ7 quilt design software.  This program was created for quilters who are just getting started using software for quilt design.  EQ Mini will help you create, edit, share, and print patterns and yardage for your quilt designs.

Lucky Shamrock Pillows

Finished size is 18″ square

Materials

  • 1/2 yd green plaid
  • 1/2 yd linen for background
  • 1  1/2 yd shamrock print
  • 5/8 yd muslin
  • 5/8 yd batting

Directions

Cut Fabric:

Green Plaid

  • 4 — 7 1/2″ squares (A)
  • 16 — 3 1/2″ x squares (E)
  • 4 — 2 1/2″ x  WOF strips for binding

Linen

  • 12 — 2 1/2″ x squares (B)
  • 5 — 2 1/2″ x 14 1/2″ strips (C)
  • 4 — 2 1/2″ x 18 1/2″ strips (D)
  • 48 — 1 1/2″ squares (F)
  • 2 — 2 1/2″ x 6 1/2″ strips (G)

Shamrock Print

  • 4 — 18 1/2″ x 24″ rectangles

Muslin

  • 2 — 19″ squares

Batting

  •  2 — 19″ squares

 

Piece the large Shamrock Pillow

  1. Place a 2 1/2″ linen square (B) on a corner of a large shamrock leaf (A).  Sew a diagonal corner.  Mark a diagonal line onto the wrong side of the square with a pencil or water soluble marker.  With right sides together (RST), stitch the square onto the leaf on the marked diagonal line. Trim the excess to a 1/4″ seam allowance.  Press seam to the darker fabric side.
  2. Sew a diagonal corner to 3 of the corners on each of the four large shamrock leaves.
  3. Sew the four leaves together to form the shamrock matching the seams.
    large-shamrock
  4. Add the outside border by sewing two 14 1/2″ linen strips (C) to the side of the shamrock.  Sew two 18 1/2″ linen strips (d) to the top and bottom of the shamrock.  Set aside.

 

Piece the smaller shamrocks pillow

  1. Place a 1 1/2″ linen square (F) on a corner of a small shamrock leaf (E).  Sew a diagonal corner using the same instructions as for the larger shamrock.
  2. Sew a diagonal corner on 3  corners of each small shamrock leaf (16 total leaves)
  3. Sew four leaves together as shown to form a shamrock matching the seams.  Repeat for the other 3 small shamrocks.
    small-shamrock
  4. Sew the sashing.  Stitch a 6 1/2″ linen strip (G) between two small shamrocks.  Repeat for remaining two small shamrocks.
  5. Sew a 14 1/2″ linen strip (C) in the center of the pillow to join the two shamrock panels.  Sew a 14 1/2″ linen strip (C) to each side of the shamrocks.
  6. Sew an 18 1/2″ linen strip (D) to the top and bottom of the pillow.

Hint: If you used linen, baste very close to the outside edge of the pillow top to keep the linen from fraying.

Quilt the top side of the pillows

  1. Layer pillow top with the muslin, batting and pillow top, right side up.
  2. Pin baste the quilt layers together.
  3. Quilt as desired.  Trim quilted pillow top to 18 1/2″ square.

Note:  I found this Celtic Shamrock design for a tattoo on the internet, it had a nice continuous design I could adapt for the quilting.  Inspiration comes from all sorts of places!

Here is the beginning of the design.

Here you can see the design on one of the little shamrocks.

And here is the design on the shamrocks with the detail on the linen as well.  The texture crinkled so well after washing.

Finish the Pillow

  1. Fold each 18 1/2″ x 24″ rectangle in half, wrong sides together, to form four 12″ x 18 1/2″ rectangles. Press.
  2. Top stitch along the folded edge of the pillow about 1/2″ away from the fold.
  3. Place the quilted pillow top, right side down.
    pillow-back
  4. Place two folded rectangles over each pillow, overlapping the folded edges in the center by about 4″.
  5. Baste 1/8″ along the outside of the layers.
  6. Bind with the green plaid binding strips.
  7. Insert a pillow form through the opening.

.shamrock-pillow-2   shamrock-pillow-1

Here are pictures from EQ Mini of my quilt design.

Show me pictures of your lucky pillows!  Tag me on Facebook or Instagram @lorimillerdesigns

Looking for the EQ Mini Design Instructions?  You can find them HERE!

For more projects and tips and techniques on using EQ Mini, visit my Electric Quilt blog series EQ Mini Friday Fun.


For more information on EQ Mini software, go to EQ Mini.